|
Instructions for using
Alexandria's Lamps Functional works of art offered by P.C. Fallon Co. Click here for our Alexandria's Lamp Department to purchase lamps and lamp fuel. |
How
to use your Alexandria's Lamp.
1. Place your Lampe Berger on a stable table away from any source of heat. Remove the openwork shade (A) and the cap (B). |
|
|
2. Fill your lamp Berger 2/3 full with fuel. Carefully wipe and fuel off the surface of your lampe. |
|
3.
Insert the wick (F) incorporated in the burner (E) into your
lamp. |
|
|
4. Light the burner (E) using a lighter or match. Let the flame to burn for 2 minutes. Warning: never replace the openwork shade (A) over the flame. |
![]()
|
5. After 2 minutes, blow out the flame. |
|
|
6. Your lamp is now working. Do not touch the burner during operation. Replace the openwork shade (A) over the burner (E). 25 to 45 minutes burn time will refresh a room of 30 to 70 sq. feet. |
|
|
7. To stop your lamp remove the openwork shade (A) and replace the snuffer cap (B) on the burner (E). Replace the open-work shade (A) on the lamp. |
|
|
Warning : Some lamp models have an openwork shade (A) that differs in shape and material from that shown in the instructions. Follow the same instructions for these. Recommendations: Replace the wick and burner assembly (E + F) about once a year or every 200 uses. Keep your lamp and fuel out of the reach of children. If swallowed, seek immediate medical attention. Never operate your lamp without Alexandria or Bella Breeze fuel. When your lamp is not in use, please ensure that the cap (B) is on the burner (E).This prevents the evaporation of the fuel. |
|
|
Use these links to navigate
our site.
You are at www.pcfallon.com. Serving the world wide web since 1998.
Small town service available to nation. |
P.C. Fallon Co.
seller of fine goods
www.pcfallon.com